Imer Syntesi Cement Concrete Mixer 250*
Drum capacity/batch output (l) 235/~190
Drum diameter (mm) 702
Wheel dimensions (mm) 370×85
Electric motor power rate 230V/50Hz-400V/50Hz (kW) 1-1
Running current 230V/400V (A) 5/2
Petrol engine power (kW) 2.9
El. motor/petrol eng. LP in operator’s position (db(A)) 72/85
El. motor/petrol eng. machine weight (kg) 119/143
Machine dim. with electric motor w/l/h (mm) 840/1465/1476
Machine dim. with petrol engine w/l/h (mm) 840/1790/1476
MY3031 Electric Hand Polisher Dry And Wet
|Max Stone Thickness:||40mm|
|Diamond Grinding Wheel:||90mm|
ASL 500-T7 B FLOOR GRINDING MACHINE
The ASL 500-T7 is a 21-inch floor grinding machine that offers a powerful grinding/polishing experience.
The aluminum alloy gearbox and planetary gear driver are capable of reaching a remarkably flat grind to produce smooth surfaces as well as a powerful repairing scratches function.
Through the integrated system of the suction port, the machine grind and polish wet or dry.
The ASL T7 is a powerful 21-inch floor grinding/polishing machine
– The grinder can be operated through the control panel
– Planetary gear driver
– Gearbox and motor are made out of aluminum for steadiness and durability
– There are 3 magnetic plates that each hold 3 diamonds (9 total)
– The handle can be rotated 360 degrees to adjust to fit each operator comfortably
– Good service and high quality
– Included accessories: lifting rods, splash guard, 33-foot cable, extra weight, and resin holders
– Can handle jobs wet or dry
– The vacuum port is located on the bottom left of the grinder
– Can run forward or reverse
Conset 3105 inject grout
Inject Grout 3105-Hydropphobic property
1. Conset 3105 chemical reaction with any kind of water (even sea water)
2. When Conset 3105 touch water, it will inflate immediately.
3. High inflate rate about 20 time of water.
6. Good for resist chemical.
7.it ca work in drinking water area, Conset 3105 has environmental protection.
MRK-350B Floor Grinding Machine Single Phase Concrete Grinder
GE8002 Ingco Gasoline Generator
- Brand: Ingco
- Model: GE8002
- Rated Voltage: 220V
- Rated Frequency: 50Hz
- Maximum Output: 0.8 kVA
- Rated Output: 0.65 kVA
- Rated Speed: 3000rpm
- DC Output: 12V, 8.3A
- Continuous Runtime: 13 Hrs
- Engine: 2 Stroke
- Stroke Displacement: 63ml
- Cooling System: Air-Cooled
- Starting System: Recoil
- Fuel Tank: 4.0 Litre
- Dry Weight: 16.5kg
For concrete injection
ASL Electric Scrubbers
The ASL Autoscrubber is a battery powered, automatic floor scrubber that is perfect for small floors but powerful enough to handle large areas.
It is equipped with a 450 watt suction motor vacuuming fluids through a 30″ floor squeegee.
With a large tank opening, cleaning the autoscrubber is quick and easy. The machines has excellent maneuverability, making it perfect for a wide range of floors.
There are two different models available: self propelled and traction drive.
ខ្សែ Injection red
Accessories for CONSET injection machine
Imer Syntesi Cement Concrete Mixer 140 Litre
Concrete Mixers IMER MIXING SYSTEM The Imer mixing system is developed through various distinguishing points: the type of largebased drum with reinforcement, the particular geometry of the mixing paddles and the low drum speed. The material mixed, analysed by the system of progressive screens, is homogeneous and well blended. THERMAL PROTECTION All machines with electric motor are fitted with IP 55 switch with no-volt coil. Thermal protection protects the motor against overload; the no-volt coil prevents the machine from being started again inadvertently after a power failure. BOLTED MIXING PADDLES The mixing paddles are bolted for easy replacement; the drum is more resistant to the risks of breakage, which are higher in correspondence with the welding spots in the case of welded paddles. MAXIMUM SAFETY FOR THE OPERATOR All moving parts are adequately protected. QUICK DRIVE BELT TENSIONING Tensioning the motor drive belt is easy and safe
Accessories for CONSET injection Machine
Use for Concrete injection.
SL-710 Cement Mortar Coating Grouting Machine
1.Solid and Portable
The body is made by iron, and the bottom with 4 wheels, easy to take along.
2.Easy to use and repair
Spray gun used for conveying and closed particles coating materials which is less than 2mm.Under the combination of air compressor, atomizing the material, and spraying evenly on the surface of the building.
Grouting Packer do the function of conveying and closing couting material. Slurry the material into building interior, to achieve the effect of waterproof and stop leakage.
Proper Structure can be repaired to avoid stopping working caused by the repair can be avoided.
3.Fast speed and efficien
Speed up to 1300RPM, more efficient.
4.Less waste, less manpower.
Hopper design material container, CE approval motor , adjustable and high torque, suitable for one gear when in using,less waste and manpower.